T-45d Power Armor HELMET - Full Helmet Kit - (UNASSEMBLED) - DIY Cosplay - Vacuum-Formed - Full Kit

DESCRIPTION HERE - PLEASE READ! - IMPORTANT

Introducing the T-45D Power Helmet, life-sized - Unassembled FULL KIT - FO4 Mechsuit version! Vacuum-Formed with High Impact Styrene Sheets.

This is the HELMET of the T-45D Power Armor FULL Kit - and includes the following:
1) Helmet Shells - left and right sides (vacuum formed)
2) tubing + corrugated tubing
3) reflective mirror lens (for eye slits)
4) knobs and switches
5) brow bar + pins
6) eye bars

-The last photos are intended for reference to show what can be made from these shells and where parts will be connected.
-Significant assembly by buyer will be required, I am simply providing the base + parts for the DIY kit.
-This helmet is separated into 4 high-impact styrene segments or quarters that will need to be assembled by buyer.
-This product is UNASSEMBLED and includes the shells of the helmet, 3d printed parts, corrugated tubing, lens/visor, and other theatrical components.
-Buyer will be required to assemble how they see fit.

IMPORTANT - Buyer will need the following to assemble:
1) Hot glue gun or other bonding tool
2) black industrial grade "Workpro" glue sticks OR Contact Cement - Use these to connect parts (available on Amazon)
3) Fiberglass Resin - apply to increase durability ( available on Amazon)
4) Disposable paint brushes to apply resin
5) Sandpaper - course, medium, fine (optional)
6) EVA Foam sheets 3mm thick (optional)

NOTE - I recommend lining the interior of this helmet with 3mm eva foam sheets for added stability. Utilize adhesive spray glue to line EVA foam inside the helmet if you choose to do so.

The shells are simply the vacuum-formed armor formed around the molds. Buyer will need to determine how they wish to assemble. Photographs are included for reference. Imperfections exist such as minor wrinkling and bumps. Sold as part of a DIY T-45 Life-Sized power armor kit.

Video tutorials on assembly can be found on Instagram @Dead_exposuredf.

This cosplay armor was vacuum formed with High Impact Styrene with a thickness of 0.08mm. Prop armor is lightweight and piece weighs about 8.6 oz.

Dimensions: Approx. 13 x 14 x 15 inches (When Assembled)
Weight: 8.6oz - lightweight for continued use without fatigue

Perfect for DIY projects or cosplay amor.